Our Mission is to be the leading supplier of the highest quality Lubrication and Fluid System Solutions and Services at competitive prices and to be continuously acknowledged as the best by our customers. In achieving this mission our customers will regard us as their "Preferred Partners".

Quality Assurance

• Howard Marten Company Limited is registered to ISO 9001-2000 for the design and manufacture of fluid systems. Since 1994 we have been successful in complying with yearly ISO compliance audits. HMCL has provided corrective and preventative actions as required to conform to the standards.
• The Quality Assurance Program, is flexible to adapt to any customer manufacturing requirements in a wide range of industries such as Power Generation, Mining, Refinery, Nuclear, Automotive, Aerospace, Pulp and Paper, while still complying to the ISO standards.

Overview

• Howard Marten Company Limited has been a supplier of Industrial Lubrication Systems since 1950.
• The C.E.O. and President privately own the Company, with 41 and 23 years of service respectively.
• The Pickering, Ontario, Canada facility was purchased in 1983, expanded in 1995 and again in 1998.
• The Plant of 48,000 square feet (approx. 4,500 square meters) is currently serviced by four overhead cranes ranging in capacity from 5 tons to 35 tons.

Total Package Solutions

• Piping to ANSI B31.1 and B31.1
• Instrumentation and Electrical to worldwide standards including NEC, CSA, IEC, CENELEC, CE
• Control Panels
• NDE testing Capabilities
• 4 overhead cranes to 35 ton capacity
• Welding to ASME Section IX and CSA W47.1
• Extensive field support

Paints & Application

• Paint Booths
• One (1) 36ft L x 19ft W x 14ft H [11m L x 5.8m W x 4.3m H]
• One (1) 20ft L x 10ft W x 9ft H [6.1m L x 3m W x 2.7m H]

Welding Capabilities

• GMAW Hard Wire - Carbon Steel and Stainless Steel
• Welding Capabilities
• GMAW Flux Core - Carbon Steel and Stainless Steel
• GTAW / SMAW - Carbon Steel and Stainless Steel for High Pressure Pipe
• All welders Certified and Registered to C.W.B. and T.S.S.A.

Testing

• Test stand Diesel Generator output up to 250 kW - AC Motors up to 335 HP [250 kW] @ 575VAC
• DC Motors up to 60 HP [45 kW] @ 125VDC - AC Voltage ranges: 575, 460, 380, 220/208 & 110 @ 50 or 60 Hz
• Calibrated Flow and Pressure Instruments
• Vibration / Noise Measurement
• Oil Storage Tanks - Two (2) 4,300 USG [16.25 m³]: each with Heater, 10 micron Filter and Pump
• Turbine Oil (ISO VG32) or Gear Oil (ISO VG220)
• Fluid Cleanliness Measurement

Download Howard Marten's Company Brochure

* For more information on Howard Marten visit them online at www.HowardMarten.com